Under route hot pipe

[TRQ STEER FTL]

I noticed y'all have a one piece hot pipe available with your FJ built big turbo kit but was wondering if you could sell the hot pipe alone made to fit the stock k04? Also wondering if a cold pipe made to fit a tr8 core could be made as well?

[Matt@FJPerformance]

The under the motor kit will only work with Big turbos, our 1 piece cold pipe will work. I apologize about the roughness of the website, we're having a new one designed and should be up and running with all of the new options in a few weeks. We will have a new ic piping kit coming out soon as well for the ms3.

Thanks
Matt@FJ

[TRQ STEER FTL]

Originally Posted by Matt@FJPerformance The under the motor kit will only work with Big turbos, our 1 piece cold pipe will work. I apologize about the roughness of the website, we're having a new one designed and should be up and running with all of the new options in a few weeks. We will have a new ic piping kit coming out soon as well for the ms3. Thanks Matt@FJ

I was unable to find your 1 piece cold pipe. The website is a bit rough, but I'm very interested in your under route piping since HTP seems to have jumped ship on their kit so I'm trying to assemble my own. I understand JBR has their own kit out but I've had bad luck with silicone couplers/intakes/etc and wish to stick with aluminum. Any idea on a time frame for the kit? I've been holding out for a couple months now and I'm getting more and more impatient.

[Etipp98]

Originally Posted by TRQ STEER FTL I was unable to find your 1 piece cold pipe. The website is a bit rough, but I'm very interested in your under route piping since HTP seems to have jumped ship on their kit so I'm trying to assemble my own. I understand JBR has their own kit out but I've had bad luck with silicone couplers/intakes/etc and wish to stick with aluminum. Any idea on a time frame for the kit? I've been holding out for a couple months now and I'm getting more and more impatient.

How did HTP jump ship on their kit?

[TRQ STEER FTL]

Originally Posted by Etipp98 How did HTP jump ship on their kit?

Ahh maybe i went too far as to completely say that but in another thread that dated back months ago it was always with the "it will be avalibe soon." Kinda pulled the two weeks on the meth tank as well but it's just my opinion, everyone's entitled to their own.

[Etipp98]

Originally Posted by TRQ STEER FTL Ahh maybe i went too far as to completely say that but in another thread that dated back months ago it was always with the "it will be avalibe soon." Kinda pulled the two weeks on the meth tank as well but it's just my opinion, everyone's entitled to their own.

It has been released. Look on their site. I am running it. The FJ kit is cheaper although and is 1 piece which is a + in my book.

[Matt@FJPerformance]

The kit is available now. Send us an email at sales@FJperformanceinc.com and we will get one out to you! Again sorry about the website

[CS-Mike]

Originally Posted by Matt@FJPerformance The kit is available now. Send us an email at sales@FJperformanceinc.com and we will get one out to you! Again sorry about the website

Sent from my SM-N900V using Tapatalk

I'm looking forward to receiving my monster FJ Performance Inc built Freektuned MS3 monster. It's going to be epic!

Sent from my SM-N900V using Tapatalk

[maisonvi]

I run the FJ one piece hot pipe its really nice. Its really close to the passenger side half shaft, but I made it all work. I will say I think it helped spool and with only 2 couplers to blow on that side, its nice. Also a fan of only having one 90 degree bend (right before the ic)

I have a DIY cold pipe with too many couplers so a cold side would be soething I might be interested in.

[TRQ STEER FTL]

Maybe we should just be glad another vendor has joined and is continuing to produce quality parts for our platform. Cheers!