Damond Motorsports TB Meth Injection spacer

[Farhan@DM]

Need a nice clean setup to inject additional fluid into your air stream? Don't want to tap pipes on your car? Look no further.

The Damond Motorsports Throttle Body Spacer has 6 1/8" NPT ports to hook up whatever you want to inject right before the intake manifold. It sandwiches between your throttle body and intake manifold and allows you to thread in multiple nozzles, lines, or injectors for as much as 800 hp of fuel! The spacer comes with all the hardware you need for an easy install, including bolts, washers, and all the plugs you'll need.

Pricing:
$69 no gaskets
$79 1 OEM TB gasket
$94 2 OEM TB gaskets
USPS Priority shipping is included in the USA 48.

http://damondmotorsports.com/product...-ports-pre-buy

This spacer uses a stock throttle body gasket on each side, so you need 2 total. Please select the option you need for additional gaskets. Supplied gaskets will be OEM gaskets.

Will work with stock TMIC on Mazdaspeed 3 2007-2013 and Mazdaspeed 6 2007. You will need to trim the cold side boost tube 16mm.
Will NOT work with Mazdaspeed6 stock cold pipe.

Injectors and/or nozzles are not included.
Shown with Coolingmist injection nozzles (not included).

[lnumbp]

Way cool! Is there a rubber o-ring gasket on both sides of the spacer?

[Farhan@DM]

Originally Posted by lnumbp Way cool! Is there a rubber o-ring gasket on both sides of the spacer?

There is not. The stock gasket is used on both sides. One will be provided with the kit for under $80 total.

[Sebs6]

Any time frame?? Around went is gonna be released.

[Farhan@DM]

Originally Posted by Sebs6 Any time frame?? Around went is gonna be released.

Best case, shipping in 1-2 weeks.

If beta testers find problems, that moves out. We will not release a product that we and our beta testers are not happy with, so please be patient if it comes to that. We're confident in an October release even with a redesign, if needed.

[Novej]

Can you get it with a single nozzle?

[Farhan@DM]

Originally Posted by Novej Can you get it with a single nozzle?

Nozzles are not included. You can run 1 to 4 nozzles of your choosing. Plugs will be provided for the other ports you don't use.

[rfinkle2]

[[R]usty]

I think I speak for everyone when i say...

[WetzMS3]

Originally Posted by rfinkle2

[Novej]

Originally Posted by Farhan@DM Nozzles are not included. You can run 1 to 4 nozzles of your choosing. Plugs will be provided for the other ports you don't use.

Sorry I didn't mean nozzles I meant the pre drilled holes for the nozzles. Nevertheless you answered my question so thank you If its not too early go a head and put me down for the first batch when we can order them!..............I'm serious!

[kbz0129]

Damn, 4 nozzles!

[cciepunk]

Just another product I need to buy from DM.

[chapdawg]

i need to get on this beta tester list… its nice to see companies breathing life back into the platform

[Alpha]

Mmmm.... This + EFR + Aquamist =

[LatinKraze]

Make this spacer for Bosch injectors

[sidekick]

Would this work with a TMIC? Or is it designed to be used with a FMIC?

[WetzMS3]

Originally Posted by sidekick Would this work with a TMIC? Or is it designed to be used with a FMIC?

This fits on the stock manifold and easily works with TMIC.

Ask me how I know

[Poohster]

I guess that all hardware includes longer bolts for installation? Just asking. Great product!

[Easter Bunny]

Originally Posted by WetzMS3 This fits on the stock manifold and easily works with TMIC. Ask me how I know

How do you know?

[WetzMS3]

Originally Posted by Easter Bunny How do you know?

[Farhan@DM]

Update.

With stock manifold and tmic, you're able to use the two ports facing down, or at least one port facing up depending on your nozzle setup. It was evident that bottom or top + side ports couldn't be used with stock mating parts. So we're doing the sensible thing and adding 2 more ports on a third side. You'll be able to get 2 down + 1 or 2 up on stock mating parts, and the side if you have aftermarket manifold (and the TB rotated).

We're sticking with the price we committed to.

[Poohster]

I have a MS6 2006 cold pipe that wraps to the TB. How is the fitment? I can't be certain, but the space between the TB and the cold pipe may not be much. Thanks.

[Farhan@DM]

Originally Posted by Poohster I have a MS6 2006 cold pipe that wraps to the TB. How is the fitment? I can't be certain, but the space between the TB and the cold pipe may not be much. Thanks.

Sorry, you'll need a new cold pipe and boost tube.

[Farhan@DM]

Prebuy is on! Come get some.

Mazdaspeed 3/6 TB spacer with injection ports PRE-BUY | Damond Motorsports

[ms6mil]

paypal sent can't wait.

[Putin 2.3T]

Ordered. Can't wait for release.

[rfinkle2]

[maisonvi]

damn, 6 ports? Just curious, why so many?

[WetzMS3]

Originally Posted by maisonvi damn, 6 ports? Just curious, why so many?

Because all of the meths!!! Right @rfinkle2;???

Mostly for mounting options and flexibility depending on the setup

[shane5747]

Pre-Order placed. I've been waiting for something like this. I really did not want to drill in to my cobb coldpipe, or add a tap in the silicone.

[tegxsi]

I was wondering if something like this existed... looks good!

[ms6mil]

@Farhan@DM; Any word on a ship date yet? the suspense is killing me!!!

[Farhan@DM]

Originally Posted by ms6mil @Farhan@DM; Any word on a ship date yet? the suspense is killing me!!!

All I'm promising is by month end, but realistically will probably be around the 24th. I want to make sure the function is solid as well as the form.

[SpeedRebirth]

I'll be buying one even though i don't have a WMI system Getting this spacer will push me to actually buy one

[Farhan@DM]

Originally Posted by SpeedRebirth I'll be buying one even though i don't have a WMI system Getting this spacer will push me to actually buy one

You and me both.

Get your order in soon. Hopefully we'll guess right at how many extra we should get, but no guarantees if you don't preorder.

[jack_hammer]

Originally Posted by Farhan@DM You and me both. Get your order in soon. Hopefully we'll guess right at how many extra we should get, but no guarantees if you don't preorder.

Is this a one time order for you guys? Or just saying you'll probably sell out and have to wait for the next order to be cut?

[tikous360]

there's any gain on use this without WMI, just as a TB spacer?

[mr.speedy3]

I can't see the original picture for some reason, but is there any chance you'd be selling it with a TB TIG? Seems like a good opportunity for people to install a TB tig since the TB has to come out.

tapatalkin

[Matt@DamondMotorsports]

Originally Posted by jack_hammer Is this a one time order for you guys? Or just saying you'll probably sell out and have to wait for the next order to be cut?

The later, more or less. We do plan on always stocking them though.

Originally Posted by tikous360 there's any gain on use this without WMI, just as a TB spacer?

TB spacers on carbureted and TBI cars can help to mix the air and fuel mixture. On a EFI port or, in our cases, direct injected engine, they have no real effect. It adds a little bit of plenum volume, but it's so small it's insignificant.

It'll add to the butt dyno though, so in that sense, you should buy one