ISC Coilovers at EdgeAutosport!

[exentix]

i could be wrong, but i recall seeing somewhere that they offer custom rates at no extra charge? just have to specify upon ordering.

but then again, i could be out in left field on this one

[ISC Suspension]

Hey folks,
We offer custom spring rates for no additional charge (dampers are valved accordingly).
So when you order from Edge Autosport just let them know and we can provide.

If there is enough interest in a certain rate, we can implement it as a default setting; such as a 9/7 or 8/6 for street sport, etc...

Thanks,
ISC

[The Gilf]

do you think you could make it so there is a drop down selection on all of your vendors site so its right there in the customers eyes so they dont forget and it sticks out in their head "oh how stiff do i want it?"

[5LOWMS6]

Originally Posted by ISC Suspension Hey folks, We offer custom spring rates for no additional charge (dampers are valved accordingly). So when you order from Edge Autosport just let them know and we can provide. If there is enough interest in a certain rate, we can implement it as a default setting; such as a 9/7 or 8/6 for street sport, etc... Thanks, ISC

So what are the spring rates that are available right now?

[WetzMS3]

Originally Posted by 5LOWMS6 So what are the spring rates that are available right now?

ISC Coilovers at EdgeAutosport!

Post 45, last page.

[5LOWMS6]

Originally Posted by WetzMS3 ISC Coilovers at EdgeAutosport! Post 45, last page.

whoops I missed that post, Thanks

[The Nut]

+1 for 9K/7K

[exentix]

i will say this after adjusting the coils again slightly... its raised now to the point of maybe an 1/8" gap above the tire and it rides much better than when it was about 3/4" lower. still havent messed with the dampening and what not, but each adjustment i make it seems to ride slightly better. its not really rough with the street sport springs. its firm, but not harsh by any means. camber arms go on this weekend and fender roll tonight. its getting there.

[Jakee1212]

I would also be interested in getting 8k springs for the front on mine.

Sent from my SCH-I510 using Tapatalk 2

[Lightweight]

any one install these on a gen 1? I'm still waiting for mine to arrive. do you need spacers?

[jrho]

Originally Posted by Lightweight any one install these on a gen 1? I'm still waiting for mine to arrive. do you need spacers?

I didn't need any for my stock wheels

Sent from my Nexus 5 using Tapatalk

[Lightweight]

Originally Posted by jrho I didn't need any for my stock wheels Sent from my Nexus 5 using Tapatalk

Ok cool thanks!


Sent from my iPhone using Tapatalk

[ktms3]

I got the Ksport and I feel it's way too soft for me. Didn't really notice any changes when changing the dampers up. I'm definately going to look into these @edgeautosport

[EdgeAutosport.com]

Originally Posted by Lightweight any one install these on a gen 1? I'm still waiting for mine to arrive. do you need spacers?

You won't need any spacers for these unless you are running an 8.5" to 9" wide wheel, and that depends on the offset.

[Lightweight]

Originally Posted by EdgeAutosport.com You won't need any spacers for these unless you are running an 8.5" to 9" wide wheel, and that depends on the offset.

Ah ok cool thanks. I'll just be on stock wheels


Sent from my iPhone using Tapatalk

[5LOWMS6]

Ordered these for my ms6 today, and I will most likely do a review of them when installed since I haven't seen any ms6 reviews yet.

Sent from my C6903 using Tapatalk

[6erforlife]

Originally Posted by 5LOWMS6 Ordered these for my ms6 today, and I will most likely do a review of them when installed since I haven't seen any ms6 reviews yet. Sent from my C6903 using Tapatalk

What version did you order? i.e. street comfort, street sport, etc? I'm in the market for coils as well and I've been thinking about these too

[5LOWMS6]

Originally Posted by 6erforlife What version did you order? i.e. street comfort, street sport, etc? I'm in the market for coils as well and I've been thinking about these too

Street sport

Sent from my C6903 using Tapatalk

[Lightweight]

I ordered street comfort so I'll let you all know how those are


Sent from my iPhone using Tapatalk

[EdgeAutosport.com]

Feel free to post all your reviews here if you want, or at least a link to them. We'd definitely appreciate the feed back!

[The Nut]

@EdgeAutosport.com; has @ISC Suspension; given you guys any info yet on making custom spring rates available? In post #82 they mentioned making them a possibility.

[exentix]

I will say as far as spacers go, if you run FD rx7 wheels, 5mm may be needed. the high offset isnt an issue on say rx8 wheels because the larger diameter moves the lip away from the bottom portion of the coilover so there is more clearance. however, the fd wheels were very close but clear with a 5mm spacer.

[EdgeAutosport.com]

Originally Posted by The Nut @EdgeAutosport.com; has @ISC Suspension; given you guys any info yet on making custom spring rates available? In post #82 they mentioned making them a possibility.

Custom spring rates are available but you have to specify what you want, then they can be ordered with the spring rates you specify.

[The Nut]

Originally Posted by EdgeAutosport.com Custom spring rates are available but you have to specify what you want, then they can be ordered with the spring rates you specify.

Thanks dudes!!! Will customizing spring rates affect price?

[Saiyanjin2]

Originally Posted by EdgeAutosport.com You won't need any spacers for these unless you are running an 8.5" to 9" wide wheel, and that depends on the offset.

Would an 18x8.5 44 offset wheel have any clearance issues?

[EdgeAutosport.com]

Originally Posted by Saiyanjin2 Would an 18x8.5 44 offset wheel have any clearance issues?

I can't say for sure, but it would be pretty close I would think...

[LumberJack]

Originally Posted by Saiyanjin2 Would an 18x8.5 44 offset wheel have any clearance issues?

I wouldn't recommend it honestly. I barely barely and I mean barely cleared my ksport fronts that I was using a while back and they were 18x8.5+38 on 245s. Idk how much less offset you could get away with IMO.


Sent from my iPhone using Tapatalk

[The Nut]

@EdgeAutosport.com; how come the MSF VIP coupon code doesn't work for these?

[5LOWMS6]

Originally Posted by EdgeAutosport.com I can't say for sure, but it would be pretty close I would think...

Y U NO SHIP ME COILOVERS?? Lol

I paid for these on April, 22. Are they still out of stock? I emailed Nick about the status of these and got no answer.

[LumberJack]

Originally Posted by 5LOWMS6 Y U NO SHIP ME COILOVERS?? Lol I paid for these on April, 22. Are they still out of stock? I emailed Nick about the status of these and got no answer.

I believe they still are. I talked to jp the other day about getting some and said something about still being out of stock at isc.


Sent from my iPhone using Tapatalk

[The Nut]

Originally Posted by LumberJack I believe they still are. I talked to jp the other day about getting some and said something about still being out of stock at isc. Sent from my iPhone using Tapatalk

Hopefully that's because they're stocking up on custom spring rates.

[The Gilf]

anybody having issues with getting these coilovers if so i maybe able to see wht the hold up is to help out if thats ok with everyone

[skiptowncat]

Could you pm me with a price including shipping to the uk? Postcode WN1 2TA
@EdgeAutosport.com;

[EdgeAutosport.com]

Originally Posted by skiptowncat Could you pm me with a price including shipping to the uk? Postcode WN1 2TA @EdgeAutosport.com;

PM'd

[skiptowncat]

Just ordered 9k front and 7k rear, I'll write a short review when I fit them

[skiptowncat]

Well, turns out I can't get the custom rates so I've gone for street sport.

[skiptowncat]

Finally got these fitted.
Awesome quality, the ride is better than stock aero suspension and it handles beautifully, there's just so much grip!!
10/10 for me!!

[The Nut]

@JP@edgeautosport.com is it not going to be possible to get custom spring rates for these?

[EdgeAutosport.com]

Originally Posted by The Nut @JP@edgeautosport.com is it not going to be possible to get custom spring rates for these?

The only custom spring rates we are able to readily get are the predetermined spring rates for the daily/street/race options.

By the way, ISC Coilovers are available again at last.

[865ms3]

thanks @EdgeAutosport.com; got mine in and installed last night. fitment is very close with my rx8 wheels and i will HAVE to run spacers for my sticky tire FD wheel setup.

ride is good so far. still have to tweak the ride height.