Timing chain/VVT replacement parts list

[chuckms6]

Made this thread per @Raider; request, in order to help future searchers.

Firstly, in order to properly time the engine you will need the timing plate and peg for the 2.3 disi mzr. you can buy one. i purchased this one since it was the best bang for my buck and i know i will use it more than once.
@Pseudonym; found this kit which is complete and reasonably priced.

In order to do the timing chain you will need the following parts



to do the vvt you will need to add the following parts



the parts with part numbers need to be replaced. they are one use, torque to yield items, but cannot be found in the diagrams, so you will need to search the part numbers.

Attached Images

	timing chain parts list.png (34.4 KB, 3800 views)
	vvt parts list.png (19.2 KB, 3720 views)

• Share
  • Share this post on
  • Digg
  • Del.icio.us
  • Technorati
  • Twitter

__________________

DIY SRI, DIY WAIC, VCTS Mod, Gutted Stock DP, Cobb AP, SURE TIG, KMD Internals, Denso ITV22's
SURE Dreadnaught, DSS Left Rear Axle, Custom in car SSP, JBR SSP, Powered by Max Shift Knob
Megan Racing Coilovers
13.7@ 96 w/1.8 60ft (SRI, AP)
13.4@ 102 w/1.9 60ft (SRI,AP,WAIC,TIG, Internals, ITV22's)

---

Last edited by Raider; 05-01-2014 at 11:32 AM. Reason: Updated with kit

[pzr2874]

I know this is in 3/6 land, but the parts are identical for the 6 and Gen1 3?

Meaning, these parts are for both models?

[BigRedSpecial]

Thanks for this; may come in handy in the future.

[chuckms6]

Originally Posted by pzr2874 I know this is in 3/6 land, but the parts are identical for the 6 and Gen1 3? Meaning, these parts are for both models?

Yes. These parts are interchangeable.

tapatalkreplaceing

[Raider]

Stuck!

[TiGraySpeed6]

I just picked up my Speed6 yesterday from a TC/VVT job. Thought I'd add an actual invoice just to verify the list above. There are a few extra things on here that don't need to be part of a core do it yourself kit.

[pzr2874]

how the shit did u pull that off on warranty?

[TiGraySpeed6]

SSP87 baby! Gotta love it!

[MS6 Sanchez]

"7 years or 70,000, which ever comes first"
Fuck i'm at 78xxx

[mxlplx71]

guess ill stock out if i start gettn the rattles

[chuckms6]

Originally Posted by mxlplx71 guess ill stock out if i start gettn the rattles

No reason, it's regular maintenance. Not expensive or hard to do yourself. Took me 4 hours dicking around. Probably could do it in two.

tapatalkreplaceing

[mxlplx71]

still 3-400$$

[chuckms6]

Originally Posted by mxlplx71 still 3-400$$

If you think that's too much to maintain a car you should be riding a bike. You can't even get tires for less than that.

tapatalkreplaceing

[mxlplx71]

if I can get it done for free its just stupid not to.

[ericrapp0507@gmail.com]

Originally Posted by mxlplx71 if I can get it done for free its just stupid not to.

Called my dealership last fall before i put the car up. I am at 74k. They said they would prorate the job. They all know my car has seen the track and was modded day two.
The chain is very loose and i wont drive again till thats sorted.
Maybe i will do it myself when my buddy gets home in spring.
But like you say. because i have the bulletin on my fridge, if i can get done for free why wouldn't I ?

[MS6 Sanchez]

Who wants to help me fix my shit? I'm near Des Plaines, IL... I'm a retard when it comes to mechanical things

[TiGraySpeed6]

Is there a NATOR for IL? That's the group you wanna get beer for to be sure

[MS6 Sanchez]

Yea there is! Haha just thought this was the appropriate thread

[Stealthvr4]

Where did you purchase these parts?

[Raider]

/there is a guy in VIP we go through.

[dshrek]

I just placed an order. Thanks for the list. It was super easy to follow. My local dealership confirmed that my VVT and timing chain are bad and said that they have never done one for under $1,200.

I was also told that they can not pro rate for warranty work since I have 84xxx miles.

[kneedraggin101]

Have to get this done for a buddy of mine... So thanks for the list

Sent from my SGH-I747M using tapatalkreplace 2

[Funkster777]

Just picked mine up today. $1349.71. No chance to wait to do it later.

[Thoffman26]

Mazdaspeed6 engine knock - YouTube

Mazdaspeed6 engine knock - YouTube

What do you guys think of this sound? vvt? i just bought the car, first mazda. I come from diesels so hearing this out of a car just doesnt sound right to me. watcha think?

[Funkster777]

Originally Posted by Thoffman26 Mazdaspeed6 engine knock - YouTube What do you guys think of this sound? vvt? i just bought the car, first mazda. I come from diesels so hearing this out of a car just doesnt sound right to me. watcha think?

You're fucked. I hope you have a lot of cash. It is the VVT. I hope you have a warranty where you bought it.

[chuckms6]

Originally Posted by Thoffman26 Mazdaspeed6 engine knock - YouTube What do you guys think of this sound? vvt? i just bought the car, first mazda. I come from diesels so hearing this out of a car just doesnt sound right to me. watcha think?

That's a lot heavier sound than vvt. sounds more like rod knock. vvt or timing chain is a tick. It may get that loud during a cold start but it goes away very quickly.

tapatalkreplaceing

[Thoffman26]

haha it was the vvt, i got it replaced last week. no warenty im at 120k

[twincitySPEED6]

Thanks for the list. I've put about a good 40 hrs of tool time on my buddies msp I think it's time to repay it

[Pseudonym]

what website is the op screenshot from?

[Pseudonym]

does this look complete?

[chuckms6]

Originally Posted by Pseudonym what website is the op screenshot from?

Onlinemazdaparts.com

Originally Posted by Pseudonym does this look complete?

Sure does, that's a good find. I'll have to update the op with that kit, thanks!

[TiGraySpeed6]

I think I'd pick up a new chain tensioner as well, but otherwise the kit does seem complete- nice find!

[mrQQ]

I'd so prefer my buy list to get shorter than longer lol

[Rainmens]

Originally Posted by Pseudonym does this look complete?

Isnt this kit $50 more than if you piece it to together AND missing the tensioner?

[chuckms6]

Originally Posted by Rainmens Isnt this kit $50 more than if you piece it to together AND missing the tensioner?

Idk, I don't think it was that expensive when was originally posted. And yes it is missing the timer.

Sent from my SAMSUNG-SGH-I727 using tapatalkreplace 2

[Rainmens]

Originally Posted by chuckms6 Idk, I don't think it was that expensive when was originally posted. And yes it is missing the timer. Sent from my SAMSUNG-SGH-I727 using tapatalkreplace 2

Well either way, its a nice option and thank you very much for youre list.

[ArmanRus]

EDIT: Meant to post this in NATOR WI Boards.

FML. Pulled the valve cover today to investigate the rattle that I hear on part throttle. Timing chain is stretched. Check out the wear marks on the valve cover.

What sucks is that I have a roadtrip next week to New Jersey and we are taking the Speed. Planned on tackling this myself after the road trip with the help of @Opdahl; and his air tools. Should cost around $400.

Now I need to take it in sometime next week to Mazda and they quoted me $650 just for labor.







And the coup d' grace:

[MS6 Sanchez]

Originally Posted by ArmanRus EDIT: Meant to post this in NATOR WI Boards. FML. Pulled the valve cover today to investigate the rattle that I hear on part throttle. Timing chain is stretched. Check out the wear marks on the valve cover. What sucks is that I have a roadtrip next week to New Jersey and we are taking the Speed. Planned on tackling this myself after the road trip with the help of @Opdahl; and his air tools. Should cost around $400. Now I need to take it in sometime next week to Mazda and they quoted me $650 just for labor. And the coup d' grace:

Ill let you borrow my cam alignment tool and top dead center tool

[KevMS6]

Is it best to order these parts from onlinemazdaparts?

[ArmanRus]

Check eBay for complete VVT replacement kits.