Mazdaspeed Forums - MAPerformance REV 3 Intake Manifold SALE!

Mazdaspeed Forums (http://www.mazdaspeedforum.org/forum/forum/)

- Modern Automotive Performance (http://www.mazdaspeedforum.org/forum/forum/f392/)

- - MAPerformance REV 3 Intake Manifold SALE! (http://www.mazdaspeedforum.org/forum/forum/f392/maperformance-rev-3-intake-manifold-sale-156896/)

MAPerformance REV 3 Intake Manifold SALE!

http://www.maperformance.com/img/for...eed-header.jpg
http://www.maperformance.com/img/forums/tb-maprace.png http://www.maperformance.com/img/forums/tb-whymap.png http://www.maperformance.com/img/forums/tb-services.png http://www.maperformance.com/img/for...-clearance.png http://www.maperformance.com/img/for...-customers.png
http://www.maperformance.com/img/forums/sep.png

MAPerformance is proud to offer a never before sale price on our very popular REV 3 Intake Manifold Porting Service!

$449.99 (Normally $649.99)

http://img2u.info/ckgni/i/gd346630a.jpg

MAPerformance Rev3 Intake Manifold (Mazdaspeed 3/6)

MAP is proud to introduce our Rev3 version of the Mazda 3/6 intake manifolds! This is unlike any other portwork offered for the platform. We start off removing the shutter valves and bar are removed for improved airflow capabilities, and as our dyno testing showed, it suffered no loss in the low and mid range! We then fully port both the runners and plenum, cut open the plenum and reshape for improved airflow, then weld everything back up.

We always test our manifolds before and after porting to ensure we are focused in the right areas. As it turns out, this manifold yielded some of the most impressive gains out of any of the manifolds we have done. The flow results show an improvement of 103CFM flow capacity, and an overall imbalance improvement from over 25% variance down to only 5.8%!

http://img2u.info/ckgni/i/gc1ebf1b2.jpg

http://www.maperformance.com/img/forums/sep2.png

Please contact us for unbeatable pricing on these products, also keep in mind we will match or beat any competitors pricing!

http://www.maperformance.com/img/forums/pm.png: Send us a PM|||||http://www.maperformance.com/img/forums/aim.png: DrewAtMAP|||||http://www.maperformance.com/img/forums/phone.png: 1-888-MAPERFORMANCE x 100|||||http://www.maperformance.com/img/forums/email.png: DReget@MAPerformance.com

http://www.maperformance.com/img/forums/social-bl.png|||||http://www.maperformance.com/img/forums/social-fb.png|||||http://www.maperformance.com/img/forums/social-tw.png|||||http://www.maperformance.com/img/forums/social-yt.png

http://www.maperformance.com/img/forums/footer.png

Do you guys have any charts showing a before and after flow comparison or HP increase?

Quote:

Originally Posted by motherfnmonsta (Post 2415092)

Do you guys have any charts showing a before and after flow comparison or HP increase?

On the product page:
MAPerformance Rev3 Intake Manifold (Mazdaspeed3) - Modern Automotive Performance

Thx sidekick, the imbalance between runners on the OEM manifold is massive and we were able to drop the imbalance to 5.81% from 25.23% on the stock manifold. Overall flow and transitions insides the manifold are of course improved aswell but the biggest benefit is even flow of air to each cylinder.

Quote:

Originally Posted by maperformance (Post 2416735)

I'm curious though, how did you make one runner flow less than stock? It's still much better balanced, but I don't understand that. Lol.

Increasing flow to other runners will decrease individual flow elsewhere.

@shadowms3; block please

Quote:

Originally Posted by kTaLgsTo (Post 3139408)

@shadowms3; block please

It's @MS3Shadow; bruh..

Well that's what I get for going by memory....:damnit:

hichamaziz has been banned.