CP-E Intake manifold

[triphop631]

Can't wait any longer.





Sent from my DROID RAZR using Tapatalk 2

[dantes5823]

Two weeks?

[PapaSmurf]

oh reaallly?

2 more years?

[triphop631]

should be soon as I believe this is the final revision.

[burn813]

Originally Posted by PapaSmurf oh reaallly? 2 more years?

Called it lol

[Enki]

Originally Posted by burn813 Called it lol

Thanked both of these posts because hilariously accurate.

[CWP_MS3]

Originally Posted by PapaSmurf oh reaallly? 2 more years?

Oh the irony of this post. LMFAO. Not to be a dick. I just happened to notice. Especially for being the 2nd post in this thread.

CP-E Intake manifold

[g00s3y]

3 years?

[atvfreek]

Very nice!

[Raider]

Merged the 2 threads to 1, moved to CPE.

In before 23436456054395423905485 reposts.

[doubleflusher]

Larger throttle body options?

[SIXual Panda]

Originally Posted by doubleflusher Larger throttle body options?

hmmmmm.....seems like you took the words right out of my mouth!

hahaha

[SPEED6 KILLAH]

Originally Posted by doubleflusher Larger throttle body options?

Of course!

[BobtailedSnail]

Looks nice but me likely Scott's

[leon78]

8th port fuelzzzzz!!!???

[Celestspeed3]

I'm curious if the manifold has something like a universal flange for the TB, then you would both and adapter for either stock, or a larger one?

I'd like to see a 3" TB.

[Fatguy729]

People with cxracing style fmic piping won't be able to use this

[Celestspeed3]

You don't know that until you try it. Hell I'll redo all my IC piping to run this.

[Fatguy729]

Originally Posted by Celestspeed3 You don't know that until you try it. Hell I'll redo all my IC piping to run this.

LOL I would too, just saying there is no way a 2.5" pipe will fit between that IM and the front of the car

Also wondering about the ms6 people with the front engine mount

[Poohster]

Some more pics with a little more detail.

[PapaSmurf]

That thing looks pretty good.

Wonder what the time frame is.


Sent from my flying tapadildo

[Lakespeed6]

Do want!

[breakfstincluded]

mmm i like itb looking velocity stacks

[Matt H.]

This is all pretty and wonderful the components and supporting hardware that CPE has created for this platform but with all of these nice high flowing engine components i think it is finally time for a company to have a cnc head program for the individuals that utilize the majority of these components. With this being said i would like to say continue with the path of good engineering and a quality path for modding this car!!!

[Celestspeed3]

While I do agree with you, I think that a CNC head is out of budget for 99% of the people here. I got my head ported and fully assembled for around $1200. I don't think I will see any more gains form a CNC head.

[El_Diablo]

Biggest benifit to cnc porting is repeatability. In some cases this can actually lower the cost because the machinest bolts the head down turns on the program and walks away to work on something else. Will this be the case with a MZR head setup? Depends on the head, the cnc machine, the program writer and what it costs to run the machine and write the program. Sould it be cheaper than traditional with more consistant results? Yes, but its going to be finding the right person to do so.

[anavrinIV]

Originally Posted by El_Diablo Biggest benifit to cnc porting is repeatability. In some cases this can actually lower the cost because the machinest bolts the head down turns on the program and walks away to work on something else. Will this be the case with a MZR head setup? Depends on the head, the cnc machine, the program writer and what it costs to run the machine and write the program. Sould it be cheaper than traditional with more consistant results? Yes, but its going to be finding the right person to do so.

it's also about how much business that guy can get. Spending all the time to write the program will be very expensive if only one person has to pay for it. the repeatability is a great aspect of CNC machining, but if you never repeat it then you have a very expensive one-off piece that would have been better off, in this case, being hand polished.

If pablo were to set up a CNC service it would probably be worth it as this whole forum would send out to have work done. Almost anywhere else though, it's probably not the best route. Just IMO, and just throwing an opinion out there, not looking to start an argument.

[El_Diablo]

I completely agree in terms of the business aspect and should have also included that in my post. Thank you for hitting that missed point.

[Matt H.]

My thinking in terms of the cnc program if said company wishes to accept this mission would to have a core program for good turn around times and to have two stages in my eyes this is all that is needed for the individual that wishes to do this. So stages i would love to see the stock head fully ported to a level in witch stock valves and springs so on and so can tolerate and theeeennnnnn the mack daddy the head ready to go 1mm bigger valves fully ported and a optional spring package. I agree to above statements about programing this would be a attension to detail kind of job and for someone that has worked with cnc processes for years!!!!!! In the end I think said company would have them a fine product and would help a wide range of poeple reach there goals though a better flowing engine.

[mazdafreak]

@forcedinduktion; here is cpes manifold with PI.

[Mr Wilson]

Soooo ETA? 2 weeks?

[rfinkle2]

Originally Posted by Mr Wilson Soooo ETA? 2 weeks?

Glad you bumped this.

Are there meth ports / bungs on this IM?

[triphop631]

Originally Posted by rfinkle2 Glad you bumped this. Are there meth ports / bungs on this IM?

Port injection ports.

Sent from my DROID RAZR using Tapatalk 2

[Poohster]

I think I remember Josh saying that there is a port for meth. I would have to let CP-e speak about whether it comes with standard PI or as option.

[taf0422]

curse you PG piping pre-order that sucked me in and now doesn't work with any nicer intake manifold on scott's or this one!

[rfinkle2]

Originally Posted by taf0422 curse you PG piping pre-order that sucked me in and now doesn't work with any nicer intake manifold on scott's or this one!

If you measure what you need, I have a bead roller and would cut the piping for you.

Do you have a pic of how you would have to route the piping now?

[taf0422]

Originally Posted by rfinkle2 If you measure what you need, I have a bead roller and would cut the piping for you. Do you have a pic of how you would have to route the piping now?

I believe that I would have to route the piping behind the passenger side headlight. Right now it goes down directly next to the dipstick. So right in the thick of things.

[rfinkle2]

Originally Posted by taf0422 I believe that I would have to route the piping behind the passenger side headlight. Right now it goes down directly next to the dipstick. So right in the thick of things.

If you measure things out, I'll cut the piping for you with my pipe cutter and roll the beads for you.

You can get the piping and couplers pretty cheap from silicone intakes.com.

Do you ever go to PA meets / NJ meets?

We are jacking this thread up. LOL

[Lakespeed6]

Any updates!?

[DaDoctor]

Originally Posted by rfinkle2 If you measure what you need, I have a bead roller and would cut the piping for you. Do you have a pic of how you would have to route the piping now?

You should see the smitten look on your face every time you bring up those 7 bead rollers you bought

Sent from my HTC_Amaze_4G using Tapatalk 2